Net Optics Smart Filtering Appliance User Manual download pdf (Page 48)

*** Condential - DO NOT Distribute ***

Director

Command Sub-Command Parameters Example and description

lter

(continued)

list ipv6=< y | n > lter list

Parameters:

ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-

dressing (defaults to IPv4 if parameter is omitted)

Displays all pending lters (with lter IDs)

running ipv6=< y | n > lter running

Parameters:

ipv6=y for IPv6 addressing; ipv6=n for IPv4 ad-

dressing (defaults to IPv4 if parameter is omitted)

Displays all active lters

sync lter sync

Loads the pending lter list with a copy of the currently

active lters

help <command> help lter

Parameter:

<command> is any CLI command

Displays information about the specied CLI command;

if <command> is omitted, displays a list of all CLI

commands

history history

Displays a numbered list of previously executed CLI

commands; any command can be executed directly

by entering the command number preceded by an

exclaimation point; up- and down-arrow keys can be

used to scroll through the command history buffeer

(see ! command)

image < 1 | 2 > image 2

Parameter:

Valid values are 1 and 2

Chooses which system image to boot from; if <n>

is omitted, the current system image information is

displayed (see upgrade command)

list list

Shows a list of lenames of saved Director device

congurations (see save command)

load <lename>* load my_conguration-1

Parameters:

<lename> is the name of the le to load; a string;

do not include an extension

Loads a previously saved Director conguration (see

save command)

logout logout

Exits the CLI shell (same as exit and quit)

module show module show

Lists information about Director hardware modules

including system serial number, DNM types, and

XFPs

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 56 57

Comments to this Manuals

No comments

Net Optics Smart Filtering Appliance User Manual Page 48

Comments to this Manuals